Aluminum siding has been around for many years, but it has only recently become a popular choice for house owners. Longboard aluminum siding comes in many different styles and can also be used in industrial applications. Aluminum siding can be found in pre-manufactured kits or in DIY projects. Aluminum siding can be painted or waxed to match the color of your home, but remember that aluminum is an open metal and can react with the paints you use.
When painting aluminum siding you can either purchase ready-to-paint rolls or paint strips, or paint by hand. Aluminum siding comes in a variety of colors, so you can match your house's exterior exactly. Aluminum siding can be painted with either a smooth, satiny finish or a textured "web edge" look, both of which are more professional looking than the more traditional wood siding. The older, more aged types of aluminum siding tend to come in a very dark finish. Aluminum siding resists staining and scratching, although older panels may need to be painted occasionally, depending on the degree of aluminum buildup.
Removing aluminum siding can be tedious and difficult, especially if there are large pieces of the material to remove. You should always start at the top and work your way down, using a scraper to scrape off any excess metal. Some homeowners prefer to use steel wool to scrape off the old panels, and others may try hot oil to melt the old paint. However, using steel wool or hot oil can damage the paint and reduce the life of the panels, so it is better to stick to using nails or screws to remove it. If you probably want to get more enlightened on this topic, then click on this related post:https://en.wikipedia.org/wiki/Siding_(construction).
When removing the aluminum siding, make sure not to damage any of the underlying structural support structures, such as the house frame or the foundation, by bending or flexing the wood underneath. Once the old siding has been removed, it is time to move on to the next step of removing the vinyl siding. This involves either cutting or snipping the pieces of metal away. Some homeowners prefer to cut the pieces with utility knives to make it easier to put up or break down the house, but keep in mind that professional contractors are probably wiser and prefer the straight edge of a diamond saw.
Once the aluminum siding, vinyl siding, or wood paneling is removed, it is time to clean up the mess. Homeowners should always rinse all the materials with warm water, making sure to rinse all the soap away before cleaning the surface. For stubborn stains, it may be necessary to use a mild detergent, but be careful to only use mild soaps and cleansers, and never use a citrus-based cleaners because they can actually cause the aluminum to rust. Once the aluminum is clean and dry, it is time to apply the new coating.
Homeowners may want to apply another coat of paint after the first coat is dry, but alumshine professionals caution against painting the wood siding and aluminum underneath at the same time. As the paint dries, it will lift off the aluminum siding and expose the bare wood underneath. Once this happens, it will be more difficult to repair or replace the damaged area. Instead of painting, most homeowners prefer to apply an exterior home treatment product, such as paint sealant. However, it should be noted that products sold at home improvement stores contain paint thinner that can actually damage the aluminum siding. For best results, it is recommended that homeowners apply paint only to the affected area, and then let it sit for a few months to completely dry and cure.
